Warm Centre II
The Barkey warming center II supplies mobile heat at any required location in the hospital – safe, reliable and simple to handle. Annoying journeys to centrally-located heating cabinets can now be avoided. Liquids in bottles or bags, textiles and small articles can be heated and kept warm.
•High energy efficiency through intelligent heating technology and energy-saving insulation – leads to a 50% time saving when heating fluids.
•In comparison to the previous model. 40 infusion bottles (1000 ml bottles at a starting temperature of 21°C) are heated to 37°C within approx. 8 hours.
•User-friendly mobility thanks to a large transport handle on the rear and four stable castors (2 with locking brakes). Universally applicable.
•For heating infusions and textiles.
•Large capacity – each of the 2 stable drawers provides space for up to 20 oval 1000 ml or 18 round 1000 ml bottles and can take a load of up to 22 kg.
•Overtemperature alarm both static and dynamic is also part of the standard equipment as well as an alarm for when a drawer is left open for more than 1 minute.
•Mechanical blocking of drawer pull-out for safe handling.
|Volume (contents):||40 bottles each with 1000 ml / approx. 80 litres|
|External dimensions:||529 x 912 x 698 mm|
|(W x H x D))|
|Power supply:||230 V 50/60 Hz or 100-120 V 50/60 Hz Standby < 1.5 W|
|Drawer construction:||Aluminium/stainless steel with perforated base, soft-close|
|365 x 275 x 410 mm|
|(W x H x D)|
|Weight empty:||59 kg|
|Set temperature:||selectable from|
|+35° to +55°C|
|MDD Classification:||II a|
Warm Centre III
The Barkey warming center III DTM heating cabinet has been specially developed for the pre-warming of infusions, blankets and cloths – e.g. in operating theatre locks (preliminaries).
In doing so, the Barkey warming center II DTM supplies mobile heat at any required location in the hospital – safe, reliable and simple to handle. Annoying journeys to centrally-located heating cabinets can now be avoided.
The Barkey warming center III DTM is flexible and has been designed to save space.
The 4 durable rollers (two of which have a locking brake) ensure additional manoeuvrability and mobility.
The use of high-class materials ensures solid quality.
Filter insert for the prevention of contamination of the air circulation system
Glass door for visual check of contents
|Volume (contents):||330 litres|
|External dimensions:||W x H x D: 660 x 1810 x 620 mm (D: incl. wall spacer and door handle)|
|Outer construction:||galvanised sheet steel with white powder coating & 4 castors (of which 2 lockable)|
|Internal dimensions:||W x H x D: 535 x 1220 x 410 mm|
|Internal setup:||9 compartments|
|height-adjustable (grille 530 x 390 mm)|
|Automatic heater switch-off when door opened|
|Set temperature:||42 °C +/- 3K at 22°C room temperature Excess temperature fuse: electronic 46°C|
|Storage/Transport:||-10°C to 70°C|